Professional Strength Spray
The 472ml Professional Strength spray unit is formulated for stubborn areas where salt has accumulated. Spray it on. Let it rest for a few minutes. Rinse off. No scrubbing necessary in most cases.
Ready to use on all underwater diving equipment – wet suits, goggles, cameras, housings, BCs, regulators.
Looking After Your Dive Gear
After every dive wash all your dive equipment using Salt-Away concentrate to fresh water, either spray your gear with the Salt-Away Auto-Mix unit or wash gear in a bucket.
There is no need to rinse the gear off afterwards as Salt-Away protects all surfaces, metal and rubber so just drain, shake and allow to dry. It is non-toxic.
Regulators
At the end of each dive, carefully use air from the cylinder to blow away water and debris from the first stage inlet. Replace the dust cap on the first stage before cleaning. Wash carefully after every dive by soaking the regulator, dive computer, hoses and dive console in a 15ml Salt-Away concentrate to 1 litre of fresh water mix, leaving overnight if possible, then remove from the mix and leave to air dry (no rinsing required).
BCDs
After diving, wash BCDs inside and outside using the Salt-Away mixing unit, or a 15ml Salt-Away concentrate to 1 litre of fresh water mix in a bucket. No need to rinse with fresh water. Periodically rinse the inside with a weak disinfectant solution to kill any bacteria. Check for leaks before and after every dive.
Wetsuits
Using our Salt-Away mixing unit, or a 15ml Salt-Away concentrate to 1 litre of fresh water mix, wash the suit inside and out. Clean and lubricate zips with the same Salt-Away mix to remove all salt.
Storing your dive gear after cleaning
When gear is dry, store it in a cool, dry, dark place, away from direct sunlight.
We also recommend Salt-Away for your housing! Check out this blog post for more info on how to care for your housing!